The BOS 18MR proximity sensor from Balluf features an integrated angle mirror made of scratch-resistant glass that is permanently attached to the housing. All models are built into an M18 metal housing (nickel plated brass), are fully polyurethane-potted and use a visible red light. Since the optical head has no lateral overhang, installation from the front is simple.
These sensors are equipped with several LEDs. When the output is switched, the yellow LED on the sensor body lights up as well as a 360° visible LED on the connector body. The green LED indicates sufficient function reserve, making calibration and alignment easier. This also allows contamination to be detected and eliminated in time.
The following models are available: retro-reflective with polarising filter, range up to 2 m; through-beam with test input and PNP/NPN output, up to 16 m range; energetic diffuse with up to 400 mm range; diffuse with background suppression and up to 120 mm range.
140 W USB-C PD reference design Altron Arrow
Electronics Technology
The design has a wide input range of 90 to 264 V AC, 50-60 Hz, and supports an output voltage range of 5 to 28 V (USB-PD 3.1 specification).
Read more...Nanometre-precision piezo actuators RS South Africa
Electronics Technology
TDK Corporation has announced two new piezo actuators that are characterised by a wide dynamic range, a high force-to-volume ratio, but with precision in the nanometre range.
Read more...Webinar: The evolving electrification of the power distribution system Infineon Technologies
Electronics Technology
New connected car functionality, along with the necessity to reduce the cost, weight and complexity associated with wire harnesses, has led to the transformation of the power distribution system in automotive engineering.
Read more...Common mode filter for automotive Ethernet Avnet Abacus
Electronics Technology
TDK Corporation has announced the introduction of its new ACT1210E Series common mode filter for automotive Ethernet 10BASE-T1S.
Read more...Energising the industrial edge
Electronics Technology
As if the drive to decarbonise energy as part of sustainability and climate change efforts was not enough, the recent rise in energy prices has brought into sharp contrast the need to re-examine how we generate, distribute, and consume electricity.
Read more...Panasonic releases its updated touch-sensitive knob Altron Arrow
Electronics Technology
Panasonic, in conjunction with Microchip, has launched an update to its existing Magic Knob, a capacitive knob ready for standard touch sensors for use in controlling automotive information displays.
Read more...Microchip’s new IC to replace Hall effect position sensors Altron Arrow
Electronics Technology
The LX34070 IC from Microchip is set to help accelerate the global move away from expensive and less accurate magnet-based solutions for safety-critical EV motor position monitoring.
Read more...A brief history of HBTs Conical Technologies
Electronics Technology
In 1947 the engineers at Bell Labs were tasked with developing a transistor. This development heralded the beginning of the semiconductor industry which changed the world forever. Transistors would have ...
printer friendly version