Test & Measurement


Cost-effective 25 GHz sampling oscilloscopes

18 April 2018 Test & Measurement

The PicoScope 9301 and PicoScope 9341 have received a bandwidth upgrade from 20 GHz to 25 GHz – significant because 25 GHz bandwidth allows 5 harmonic capture of data rates up to 10 Gbps. With serial data streams up to 10 Gbps now commonplace, standards such as HDMI 2.0, PCIe Gen2 and Gen3, GBit Ethernet and USB 3.1 Gen1 and Gen2, to name but a few, all have transmission lines, cables, components, transmitters and receivers which all need pre-compliance testing and characterisation.

Engineers need to constantly test and validate their designs before compliance testing. For most companies, owning a real-time scope with 25 GHz bandwidth is unrealistic (upwards of R2 600 000) so long-term renting is often the only way forward, but that could be in excess of R195 000 per month. According to local supplier, Comtest, the new PicoScopes allow users to own a 25 GHz scope for the equivalent of 1 month’s rent of a 25 GHz real-time scope.

All PicoScope 9300 and 9300-25 sampling oscilloscopes use PicoSample 3 software. The latest release, PicoSample 3.25, includes masks for USB 2.0 and USB 3.1 Gen1 and Gen2, and the user interface has been optimised for use with a mouse or a touchscreen PC or laptop.

No oscilloscope measurement system is complete without a set of high-performance probes, and Pico Technology now offers a full range of highly cost effective microwave and gigabit probes, ideally suited to low-invasive, in-system probing of analog, pulse, impulse and high-speed serial data streams.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

60 MHz 16-bit AWG
Vepac Electronics Test & Measurement
Siglent’s SDG1000X Plus series function/arbitrary waveform generator offers a maximum output frequency of 60 MHz, 16-bit vertical resolution, 1 GSa/s sampling rate, and 8 Mpts arbitrary waveform length.

Read more...
AC programmable power
Accutronics Test & Measurement
TDK Corporation has announced the introduction of the TDK-Lambda brand GENESYS AC and GENESYS AC PRO series of 2 kVA and 3 kVA rated programmable AC power sources.

Read more...
QA introduces large chisel tip style probes
Techmet Test & Measurement
The two new probes have a larger diameter to provide better contact reliability.

Read more...
Digital PSU with four variable outputs
Vepac Electronics Test & Measurement
The PeakTech 6215 is a laboratory power supply with four separate voltage outputs, each one infinitely variable using the rotary controls on the front of the unit.

Read more...
High-voltage insulation resistance testers
Comtest Test & Measurement
Two new high-voltage insulation resistance testers, from Fluke, deliver accuracy and speed in industrial and solar PV applications.

Read more...
Digital accelerometer for high dynamics applications
RS South Africa Test & Measurement
TDK extends its Tronics portfolio with the AXO314, a high-performance digital MEMS accelerometer with ±14 g input range for industrial applications operating under shock and vibration.

Read more...
Acceleration sensors for wearables
Future Electronics Test & Measurement
Bosch Sensortec has introduced two new acceleration sensors, the BMA530 and BMA580, both offered in a compact size of only 1,2 x 0,8 x 0,55 mm.

Read more...
Accurate laser measurement
Avnet Silica Test & Measurement
Online Teaser: Panasonic Industry’s laser sensor has a resolution of up to 0,5 µm, a linearity of ±0,05% FS, and a high-speed sampling of 100 µs.

Read more...
Handheld analyser with wide frequency range
Vepac Electronics Test & Measurement
The PXN-400 from Harogic is a handheld spectrum analyser that covers a frequency range of 9 kHz to 40 GHz, with an analytical bandwidth of 100 MHz.

Read more...
Comtest introduces Ametek’s Mi-BEAM series
Comtest Power Electronics / Power Management
The Mi-BEAM series is a programmable DC power system that can be used in testing batteries, fuel cells, and solar inverters.

Read more...