To ensure reliable contacting of printed circuit boards (PCBs) which are contaminated with residues and or oxidised from the soldering process, a wide range of test probes is available from PTR, including the HPL (high pre-loaded) range which offers better penetration of contaminants and enables better signal transfer even in lead-free applications. Amongst the test probes in this range are several models for contacting of assembled, unleaded PCBs, offering high initial pressure and large penetration depth.
Series 1008/E features a 1,27 mm centre with a full travel of 6,40 mm, working travel of 4,30 mm, pre-loaded spring force of 1,40 N and spring force at working travel of 2,00 N. The current rating for this series is 2,0 – 3,0 A.
Series 1012/E features a 1,91 mm centre with a full travel of 6,40 mm, working travel of 4,30 mm, pre-loaded spring force of 1,20 or 1,60 N, spring force at working travel of 2,00 or 2,80 N, and a current rating of 3,0 – 4,0 A.
Series 1025/E features a 2,54 mm centre with a full travel of 6,40 mm, working travel of 4,30 mm, pre-loaded spring force of 1,30 or 2,00 N, spring force at working travel of 2,00 or 3,00 N, and a current rating of 5,0 – 8,0 A.
All of these test probes come in a variety of tip styles, and feature typical continuity resistance below 20 m.
60 MHz 16-bit AWG Vepac Electronics
Test & Measurement
Siglent’s SDG1000X Plus series function/arbitrary waveform generator offers a maximum output frequency of 60 MHz, 16-bit vertical resolution, 1 GSa/s sampling rate, and 8 Mpts arbitrary waveform length.
Read more...AC programmable power Accutronics
Test & Measurement
TDK Corporation has announced the introduction of the TDK-Lambda brand GENESYS AC and GENESYS AC PRO series of 2 kVA and 3 kVA rated programmable AC power sources.
Read more...Digital PSU with four variable outputs Vepac Electronics
Test & Measurement
The PeakTech 6215 is a laboratory power supply with four separate voltage outputs, each one infinitely variable using the rotary controls on the front of the unit.
Read more...Digital accelerometer for high dynamics applications RS South Africa
Test & Measurement
TDK extends its Tronics portfolio with the AXO314, a high-performance digital MEMS accelerometer with ±14 g input range for industrial applications operating under shock and vibration.
Read more...Acceleration sensors for wearables Future Electronics
Test & Measurement
Bosch Sensortec has introduced two new acceleration sensors, the BMA530 and BMA580, both offered in a compact size of only 1,2 x 0,8 x 0,55 mm.
Read more...Accurate laser measurement Avnet Silica
Test & Measurement
Online Teaser: Panasonic Industry’s laser sensor has a resolution of up to 0,5 µm, a linearity of ±0,05% FS, and a high-speed sampling of 100 µs.
Read more...Handheld analyser with wide frequency range Vepac Electronics
Test & Measurement
The PXN-400 from Harogic is a handheld spectrum analyser that covers a frequency range of 9 kHz to 40 GHz, with an analytical bandwidth of 100 MHz.
Read more...Real-time portable spectrum analyser Vepac Electronics
Test & Measurement
The SA series from HAROGIC Technologies is designed as a compact USB real-time spectrum analyser using low SWaP principles.
printer friendly version