High-speed camera
8 October 2014
Opto-Electronics
Vision Research announced the Phantom v2010, the newest addition to its 1 megapixel digital, ultra-high-speed camera line.
With the ability to capture more than 22 000 frames per second (fps) at full resolution, it is almost 40% faster than the previous generation Phantom v1610.
Built with high-definition and widescreen 1280 x 800 CMOS sensors, the new model features large, 28 micron pixels that allow for superior sensitivity when shooting in low light, which is often a problem with high-speed imaging. With sensitivity as high as ISO 5000 (daylight illumination) for colour images and ISO 25000 for monochrome images, less illumination is needed to capture and slow down the action.
An important consideration when comparing cameras is what method of testing is used. Some datasheets present different methods which are not always comparable to the above figures, or even use sensitivity results based on full available manipulation and enhancement.
At ultra-high speeds, memory can become a limiting factor in camera performance because of the huge amount of data that is acquired. To mitigate this, the v2010 can be configured with 24, 48 or 96 GB of memory, which can be segmented into as many as 63 partitions. This allows for the continuous shooting of back-to-back shots without the need for constant downloading.
The camera also offers 12-bit pixel depth, which yields high dynamic range and provides excellent image quality. Internal fans keep it cool, especially during outdoor use, but can be temporarily switched off for applications – such as microscopy – that are sensitive to vibration.
As with its predecessors, the v2010 comes standard with its manufacturer’s CineMag interface, which allows the user to save a high-speed shot from camera memory to non-volatile storage in a matter of seconds. With the ability to save 1 GBps of data to an attached CineMag, a 96 GB shot can be saved in about 1,5 minutes.
The camera also features image-based auto-trigger; a 10 Gb Ethernet port; internal mechanical shutter; SMPTE and IRIG timecode, genlock, ready and strobe outputs; frame synchronisation to internal or external clock; HD-SDI video outputs; component viewfinder port; and Nikon F-mount lens connection with Canon EOS, PL and C mounts available.
For more information contact Digital Visual Interface Solutions, +27 (0)83 264 9376, [email protected], www.dvis.co.za
Further reading:
Advanced HMI delivers enhanced durability
Fox Controls Rand
Opto-Electronics
This compact touchscreen HMI from IDEC provides essential visualisation and high-performance multitouch control, even in the most space-limited applications.
Read more...
Powerful UVC disinfection
Opto-Electronics
The S3535-H emitter generates an output power of more than 150 mW per chip at 265 nm, providing the strongest germicidal effect currently available on the market.
Read more...
Front panels for electronics
Seven Labs Technology
Opto-Electronics
In the world of electronics, the significance of a well-designed front panel cannot be overstated as it serves not only as the first point of interaction between users and devices, but also plays a crucial role in the functionality and aesthetics of electronic products.
Read more...
Cree: Illuminating the future of LED technology
Altron Arrow
Editor's Choice Opto-Electronics
As a pioneer in this field, Cree LED has been instrumental in shaping the LED landscape, driving innovation and performance in this sector.
Read more...
New optical sensors for object detection
Opto-Electronics
A special feature of the Würth Elektronik sensors is that they filter out visible light up to 800 nm, rather than just up to 700 nm, like many other sensors of this type.
Read more...
HTML5 WebPanel with Linux, Android, or AutomationBrowser
Vepac Electronics
Opto-Electronics
Having a front protection rating of IP65, and additional features such as Wi-Fi, Bluetooth, USB, RS232 integrated, these panels are an excellent solution for most industrial applications.
Read more...
Laser control for smart glasses
Opto-Electronics
TDK has developed the world’s first full-colour laser control device for 4K smart glasses using lithium niobate thin film.
Read more...
PVision introduces interactive PoS to South Africa
Opto-Electronics
Recently, PVision partnered with Nexmosphere, a company that transforms any digital display into an engaging experience using sensors and controls, to bring the next level of point-of-sale digital displays to consumers.
Read more...
InGaAs and SWIR surveillance
Opto-Electronics
Sensing in the SWIR range (wavelengths from 0,9 to 1,7 microns) has only recently been made practical by the development of Indium Gallium Arsenide (InGaAs) sensors.
Read more...
Touchscreen interfaces for industrial applications
Rugged Interconnect Technologies
Opto-Electronics
Being protected from water and dust ingress, scratches, abrasions, and metallic dust makes them suitable for installation into harsh environments.
Read more...
printer friendly version