Analogue, Mixed Signal, LSI


Digital humidity sensor

25 June 2014 Analogue, Mixed Signal, LSI

Sensirion’s SHTC1, sized at just 2 x 2 x 0,75 mm, measures not only humidity but also temperature – across ranges and to accuracy levels of 0% to 100% RH (±3%) and -30°C to +100°C (±0,3°C) respectively. Proprietary CMOSens technology integrates a capacitive humidity sensor, a bandgap temperature sensor, analog and digital signal processing, A/D converter, calibration data memory, and a digital communication interface supporting I2C fast mode. With 1 ms delay from power-up to measurement, operating voltage of 1,8 V and an energy budget below 1 μJ per measurement, this IC is suitable for mobile or wireless applications running on the tightest power budgets.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Infineon launches Edge Ai software solution
Altron Arrow Analogue, Mixed Signal, LSI
Infineon has introduced DEEPCRAFT, a new software solution category brand for Edge AI and machine learning, after the company recognised the huge potential of Edge AI for the market.

Read more...
16-bit voltage output denseDAC
Altron Arrow Analogue, Mixed Signal, LSI
The AD5766 uses a versatile four-wire serial interface that operates at clock rates of up to 50 MHz for write mode, and is compatible with SPI, QSPI, MICROWIRE, and DSP interface standards.

Read more...
AFE enables the software-defined factory
Avnet Silica Analogue, Mixed Signal, LSI
With its software configurable analogue inputs, where each input can be configured for voltage, current, resistance, or temperature, NXP’s N-AFE enables a new level of flexibility.

Read more...
SMD choke for currents up to 48 A
Electrocomp Passive Components
Designed for rated currents from 36 to 48 A, these surface-mountable components from TDK cover a range of inductance values from 2,3 to 8,5 µH.

Read more...
Advanced electrolytic hybrid capacitor
Electrocomp Passive Components
Online Teaser: The capacitor series from Panasonic achieves a maximum ripple current of 3,3 to 4,6 A, which is approximately 50% higher than comparable case sizes.

Read more...
Precision voltage reference
Altron Arrow Analogue, Mixed Signal, LSI
The ADR1001 is a fully integrated, ultra-low drift, buried Zener precision voltage reference solution in a single chip.

Read more...
Microphones enable low-power always-on state
Avnet Abacus Analogue, Mixed Signal, LSI
TDK Corporation has announced its InvenSense SmartSound T5848 I2S microphones to enable intelligent keyword, voice command, and sound detection at ultra-low power.

Read more...
Low power, low-noise amplifier
Altron Arrow Analogue, Mixed Signal, LSI
The ADL8141 is a low power consumption, low-noise amplifier that operates from 14 to 24 GHz, and draws a supply current of 25 mA from a 2 V supply.

Read more...
QLC Flash memory with the latest BiCS technology
EBV Electrolink Analogue, Mixed Signal, LSI
KIOXIA has implemented the groundbreaking CBA (CMOS directly Bonded to Array) technology, which enables the creation of higher density devices and an industry-leading interface speed of 3,6nbsp;Gbps.

Read more...
Swing-out industrial wall-mount rack cabinet
Electrocomp Enclosures, Racks, Cabinets & Panel Products
Hammond Manufacturing’s new industrial wall-mount rack cabinet offers dual access to equipment via the double hinge design.

Read more...