Freescale Semiconductor has introduced a new enhancement-mode pHEMT low noise amplifier (LNA) based on GaAs process technology and designed to optimise receiver performance for a broad array of wireless systems operating between 700 and 1400 MHz.
Typical applications include small cell and macrocell transceivers, as well as a range of applications requiring extremely low noise figures, high linearity, and high RF output power.
The noise figure of the new MML09231H is 0,36 dB at 900 MHz, making it ideal for receiver designers as it can boost product sensitivity to very low-level signals. In addition, it has an output third order intercept point (OIP3) of 37,4 dBm at 900 MHz for the high linearity required by today’s wireless systems.
The chip can tolerate a maximum input signal of +20 dBm, has an RF output peak power of +24,5 dBm (280 mW), high reverse isolation of -21 dB, small-signal gain of 17,2 dB (externally adjustable) and current consumption of only 55 mA from a single 5 V d.c. supply.
Other features include an integrated power-down pin, active bias control for maintaining constant current, unconditional stability over temperature, and low external component count.
USB Type-C-powered controllers Future Electronics
Power Electronics / Power Management
Diodes Incorporated has released two USB Type-C PD 3.1 extended power range sink controllers that can be embedded into battery-powered devices.
Read more...A new era in modular I/O solutions Rugged Interconnect Technologies
Analogue, Mixed Signal, LSI
Aerospace and defence system designers are demanding scalable and high-performance I/O solutions and while traditional mezzanine standards have proven reliable, they often fall short of meeting modern bandwidth, size, and flexibility requirements.
Read more...High voltage instrument op-amp iCorp Technologies
Analogue, Mixed Signal, LSI
The SGM621B is a high accuracy, high voltage instrumentation amplifier, which is designed to set any gain from 1 to 10 000 with one external resistor.
Read more...SoC for real-time AI at the edge Future Electronics
DSP, Micros & Memory
Ambiq’s Apollo330 Plus series is purpose-built to enable always-on and real-time AI inferencing on devices.
Read more...Evaluation kit for ML applications Future Electronics
DSP, Micros & Memory
The hardware kit includes radar, acoustic, pressure and motion sensors and integrates dual Arm Cortex-M4 and Cortex-M0+ CPU cores.
Read more...Power relays for energy management applications Future Electronics
Power Electronics / Power Management
The Panasonic Industry HE-R Series is an energy management relay designed for single-phase or 3-phase AC charging units, combining high capacity, high switching, and low operating power into a small size power relay.
Read more...High-speed SAR ADC simplifies design Altron Arrow
Analogue, Mixed Signal, LSI
The ADI AD4080 simplifies data converter integration by integrating a low drift reference buffer, low dropout regulators and a 16K result data FIFO buffer.
Read more...Advanced eMMC storage solutions Future Electronics
DSP, Micros & Memory
Alliance Memory provides advanced NAND flash memory storage solutions that follow the JEDEC eMMC v5.1 standard to meet the growing demand for efficient, high-capacity storage solutions in today’s digital era.
Read more...NPU in the most powerful STM32 processor Future Electronics
DSP, Micros & Memory
The STM32N6 is STMicroelectronics’ newest and most powerful STM32 and the first to come with the company’s Neural-ART Accelerator, a custom NPU capable of 600 GOPS.
Read more...2-wire quad voltage output DAC Altron Arrow
Analogue, Mixed Signal, LSI
The DAC has a 2-wire serial interface that operates at clock rates up to 400 kHz, and this interface is SMBus compatible, allowing multiple devices to be placed on the same bus.
printer friendly version