Measurement Specialties released two new triaxial accelerometers for heavy-duty applications – the Model 4332 and the Model 8102.
The 4332 is a COTS sensor featuring damped MEMS sensing technology and an amplified output, and is packaged in a rugged aluminium housing with integral cable assembly. It is offered in ranges from ±2 G to ±5 G with a low-pass filter set at 50 Hz.
It was specifically designed for motion analysis in low-frequency commercial and military applications such as building monitoring, road bed vibration, bridge safety, rail car comfort, off-road testing, underground throughways, tunnels and passageways.
This temperature compensated device has an operating temperature range of -40°C to +85°C and complies with IP68 requirements for submersion in water to a 10 metre depth. Designed to be screw-mounted, it can also be adhesively mounted for tests of short duration. It operates from 5–30 V d.c. excitation and offers a 0,5–4,5 V full scale output. The output is DC-coupled and is used in single-ended mode.
The other device – the 8102 – is a CE- and RoHS-compliant piezoelectric sensor featuring an amplified output. It is packaged in a rugged aluminium or stainless steel housing with an integral 152 cm cable assembly. It is offered in ranges from ±50 G through ±6000 G, boasts low current consumption and features an operating temperature range of -40°C to +125°C.
The low-profile device was specifically designed for high-G impact measurements. Typical uses include, but are not limited to, mining, pile driving, structure demolition, IED explosive effects, vehicle impact, weapons and ammunition testing.
Designed for screw mounting, the 8102 provides a flat frequency response to 6000 Hz with linearity of ±1% FSO. It operates from 3,0–5,5 V d.c. excitation and offers a full scale output swing equal to half of the excitation voltage.
A new era in modular I/O solutions Rugged Interconnect Technologies
Analogue, Mixed Signal, LSI
Aerospace and defence system designers are demanding scalable and high-performance I/O solutions and while traditional mezzanine standards have proven reliable, they often fall short of meeting modern bandwidth, size, and flexibility requirements.
Read more...High voltage instrument op-amp iCorp Technologies
Analogue, Mixed Signal, LSI
The SGM621B is a high accuracy, high voltage instrumentation amplifier, which is designed to set any gain from 1 to 10 000 with one external resistor.
Read more...High-speed SAR ADC simplifies design Altron Arrow
Analogue, Mixed Signal, LSI
The ADI AD4080 simplifies data converter integration by integrating a low drift reference buffer, low dropout regulators and a 16K result data FIFO buffer.
Read more...2-wire quad voltage output DAC Altron Arrow
Analogue, Mixed Signal, LSI
The DAC has a 2-wire serial interface that operates at clock rates up to 400 kHz, and this interface is SMBus compatible, allowing multiple devices to be placed on the same bus.
Read more...Dual-channel ADC for RF applications RFiber Solutions
Analogue, Mixed Signal, LSI
The ARF0471 from Advanced RF is a dual-channel, 14-bit, 3 GSPS ADC, which features an on-chip buffer and sample-and-hold circuit.
Read more...AC programmable power Accutronics
Test & Measurement
TDK Corporation has announced the introduction of the TDK-Lambda brand GENESYS AC and GENESYS AC PRO series of 2 kVA and 3 kVA rated programmable AC power sources.
Read more...Infineon launches Edge Ai software solution Altron Arrow
Analogue, Mixed Signal, LSI
Infineon has introduced DEEPCRAFT, a new software solution category brand for Edge AI and machine learning, after the company recognised the huge potential of Edge AI for the market.
Read more...Hi-Rel quarter-brick converters Accutronics
Power Electronics / Power Management
Gaia Converter’s quarter-brick series DC-DC power modules provides output power levels ranging from 75 to 250 W in fixed output voltages.
Read more...16-bit voltage output denseDAC Altron Arrow
Analogue, Mixed Signal, LSI
The AD5766 uses a versatile four-wire serial interface that operates at clock rates of up to 50 MHz for write mode, and is compatible with SPI, QSPI, MICROWIRE, and DSP interface standards.
Read more...AFE enables the software-defined factory Avnet Silica
Analogue, Mixed Signal, LSI
With its software configurable analogue inputs, where each input can be configured for voltage, current, resistance, or temperature, NXP’s N-AFE enables a new level of flexibility.
printer friendly version