Denver Technical Products is offering a new, highly accurate (0,25%) AC Watt/power factor/VA transducer. The PC20 provides three separate outputs proportional to true power, VA and power factor for use in single- or poly-phase power systems. These are the most significant parameters in the efficient utilisation of electrical energy in manufacturing or building management.
True power (Watts) is accurately measured by a continuous multiplication of instantaneous voltage and current by a four-quadrant multiplier. Average true power is then provided as the output. The apparent power (VA) is determined by taking the product of RMS voltage and RMS current.
Power factor is derived from the ratio of true power to apparent power. This measurement does not rely on phase-angle measurement and is accurate for sinusoidal or distorted waveforms in the 50–400 Hz frequency range. The PC20 can be supplied with split-core CT’s where it is impractical to dismantle existing cables or bus work.
Applications include equipment monitoring to determine and/or maintain efficiency; process monitoring and/or controlling to maintain consistent product quality; for use with SCR controlled, chopped or otherwise distorted waveforms. Industry standard outputs are provided, eg, 0–1 mA, 0–10 V, 0-5 V or 4–20 mA.
RF arrestor provides robust protection RFiber Solutions
Power Electronics / Power Management
NexTek’s range of coaxial RF surge and lightning arrestors are designed and built to provide robust protection for any radio or coaxial RF transmission application.
Read more...Wide-Bandgap Developer Forum 2025
Power Electronics / Power Management
To give designers the ultimate in design flexibility, the entire range of WBG power semiconductors will be provided including discretes, modules, and highly integrated solutions ranging from 40 V to 700 V for GaN and 400 V to 3,3 kV for SiC.
Read more...New 5 kW and 8 kW hybrid inverters Current Automation
Power Electronics / Power Management
Switching time from on-grid to off-grid mode is a rapid 5 ms allowing for protection of sensitive electronic equipment.
Read more...Power relays for energy management applications Future Electronics
Power Electronics / Power Management
The Panasonic Industry HE-R Series is an energy management relay designed for single-phase or 3-phase AC charging units, combining high capacity, high switching, and low operating power into a small size power relay.
Read more...Programmable switching DC PSU series Vepac Electronics
Power Electronics / Power Management
The SPS6000X Series from Siglent is a programmable switching DC power supply with a wide range of single output and constant power features.
Read more...Tiny MLCCs at 1250 V RS South Africa
Power Electronics / Power Management
TDK Corporation has expanded its CGA series for automotive and C series for commercial multilayer ceramic capacitors to 10 nF at 1250 V in 3225 size.
Read more...PMIC extends life of BLE products Avnet Silica
Power Electronics / Power Management
Nordic Semiconductor’s nPM2100 PMIC incorporates an ultra-efficient boost regulator and a wide range of energy-saving features to significantly extend operating time in non-rechargeable battery applications.
Read more...PCB-mount 40 W converter Vepac Electronics
Power Electronics / Power Management
With an ultra-compact 2,5 x 2,5 mm package and a high-power density of 93 W/in3, these converters are optimised for efficiency and space-saving designs.
Read more...Upgraded multiphase power inductor iCorp Technologies
Power Electronics / Power Management
The increased demand for computing power in data centres has resulted in the development of multi-phase ultra-low profile, ultra-high current copper magnetic co-fired power inductors.
printer friendly version