Passive Components


Chip resistor design kits

27 June 2012 Passive Components

Vishay introduced four new engineering design kits for its AEC-Q200-qualified D/CRCW e3 thick film chip resistors. Designed to help engineers select the perfect resistor for their application, the kits offer the commercial-off-the-shelf (COTS) devices in 0402, 0603, 0805 and 1206 case sizes and a wide variety of resistance values, conveniently taped in strips and individually labelled and packaged.

The four new design kits feature E96 series resistance values from 10 Ω to 1 MΩ (every fourth value) – in addition to a 0 Ω jumper – for 122 different values each. The resistors provide tolerance of ±1%, TCR of ±100 ppm/K, power dissipation (P70) from 0,063 W to 0,25 W, and limiting element voltage from 50 V to 200 V.

The D/CRCW e3 resistors are relevant for automotive, industrial equipment, telecom infrastructure, consumer and computer applications. They are compliant to RoHS directive 2011/65/EU and halogen-free according to the IEC 61249-2-21 definition.

For more information contact Dirk Venter, Arrow Altech Distribution, +27 (0)11 923 9600, [email protected], www.arrow.altech.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Ryzen-based computer on module
Altron Arrow AI & ML
SolidRun announced the launch of its new Ryzen V3000 CX7 Com module, configurable with the eight-core/16-thread Ryzen Embedded V3C48 processor.

Read more...
3,75 GHz RF inductor
RF Design Passive Components
The ceramic chip wire wound inductor from Coilcraft features a DC resistance of 1 O, a DC current of 175 mA, and a self-resonant frequency of 3,75 GHz.

Read more...
Robust and customisable SBC
Altron Arrow DSP, Micros & Memory
Pairing the powerful i.MX8M Plus System on Module (SoM) from SolidRun, which features the i.MX 8M Plus SoC from NXP, this high-performance SBC is set to transform industrial environments.

Read more...
New family supports future cryptography
Altron Arrow DSP, Micros & Memory
NXP has introduced its new i.MX 94 family, which contains an i.MX MPU with an integrated time-sensitive networking (TSN) switch, enabling configurable, secure communications with rich protocol support in industrial and automotive environments.

Read more...
NXP’s all-purpose microcontroller series
Altron Arrow DSP, Micros & Memory
NXP has released its MCX A14x and A15x series of all-purpose microcontrollers which are part of the larger MCX portfolio that shares a common Arm Cortex-M33 core platform.

Read more...
Non-terrestrial network module
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Fibocom unveiled its MA510-GL (NTN), a non-terrestrial networks module which is compliant with 3GPP Release 17 standard.

Read more...
Cellular IoT connectivity via satellite
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The Telit Cinterion cellular LPWA module will enable satellite data communication using the NB-IoT protocol, without any special hardware changes required for the integration of the cellular module in the customer application.

Read more...
Low noise 3-axis MEMS accelerometers
Altron Arrow DSP, Micros & Memory
The ADXL357 and ADXL357B from Analog Devices are digital outputs, low noise density, low 0 g offset drift, low power, three-axis accelerometers with selectable measurement ranges.

Read more...
Upgraded power inductor series
iCorp Technologies Passive Components
Sunlord’s multiphase co-fired power inductor HTF-MP series has upgraded the single-phase HTF-H products in terms of integrated applications.

Read more...
Infineon launches Edge Ai software solution
Altron Arrow Analogue, Mixed Signal, LSI
Infineon has introduced DEEPCRAFT, a new software solution category brand for Edge AI and machine learning, after the company recognised the huge potential of Edge AI for the market.

Read more...