Laird Technologies has added four new Bluetooth modules to its range of wireless products. The modules incorporate Bluetooth stacks and are pre-approved to minimise the design effort in implementing short-range wireless communications.
The BTM410 is designed for data applications and is a fully integrated, sub-miniature Bluetooth data-oriented module based on Cambridge Silicon Radio’s (CSR) BC04 chipset. Incorporating a full Bluetooth stack and supporting a serial port profile, the BTM410 provides a UART interface and a comprehensive AT command set to allow an easy interface to a host processor.
Targeted at systems running an embedded operating system with its own Bluetooth stack (such as Windows CE or Linux), the BTM420 module range uses the same sub-miniature format, but supports an HCI interface and is pre-approved as a Bluetooth controller sub-system.
Optimised for audio and multimedia applications, the BTM510 supports headset applications and is based on CSR’s BC05 chipset with integrated DSP. Its small form factor with low power consumption supports stereo speakers with onboard speaker drivers, as well as a microphone. The BTM510 includes a full Bluetooth stack with built-in support for A2DP, AVRCP, HFP, and HSP profiles. An AT command set, enhanced for multimedia applications, provides simple control, including the ability to map local switch functionality to a range of I/O pins.
For power multimedia applications, the BTM520 series offers a high-gain, multilayer ceramic antenna that provides +10 dBm output. In addition, the integrated Bluetooth stack provides a comprehensive range of profiles. The 32-bit Kalimba DSP, running at 64 MIPS, allows onboard implementation of noise reduction, echo cancellation and other multimedia applications. Speaker drivers, microphone bias, and all audio filtration are included within the module. The module also provides a full range of I/O, allowing it to support CSR Road Tunes and Blue Tunes applications.
All these new modules are based on the latest Bluetooth standard, Version 2.1+EDR, and deliver the advantages of secure simple pairing. This allows simpler user interfaces, making products easier to use, which reduces subsequent support costs. All of the modules are designed for high reliability and support an industrial operating temperature range of -30°C to +70°C.
Quectel partners with GEODNET Quectel Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has partnered with GEODNET to deliver Quectel’s Real-Time Kinematic (RTK) correction services, enabling high-precision positioning for IoT applications.
Read more...Bringing Bluetooth Channel Sounding to automotive and beyond with KW47 Altron Arrow
Telecoms, Datacoms, Wireless, IoT
NXP’s new Channel Sounding-certified KW47 and MCX W72 wireless MCUs are set to help automakers with distance measurement, bringing an additional ranging solution for car access and autonomous systems, and will be utilised across a broader spectrum of applications.
Read more...Dual-band GNSS antenna RF Design
Telecoms, Datacoms, Wireless, IoT
The Taoglas Accura GVLB258.A, is a passive, dual-band GNSS L1/L5, high-performance antenna for high precision GNSS accuracy and fast positioning.
Read more...What is Wi-Fi HaLow and why choose it for IoT? iCorp Technologies
Editor's Choice Telecoms, Datacoms, Wireless, IoT
Wi-Fi HaLow introduces a low power connectivity option that, in contrast to other Wi-Fi options, offers greater range of approximately 1 km, which opens up a raft of IoT use cases.
Read more...Wi-Fi 6 and Bluetooth LE coprocessor module Altron Arrow
Telecoms, Datacoms, Wireless, IoT
The ST67W611M1 from STMicroelectronics boasts an all-in-one design which, together with its capabilities, contribute to making it an attractive choice for IoT edge devices requiring a single-chip solution.
Read more...Futureproofing IoT connectivity SIMcontrol
Telecoms, Datacoms, Wireless, IoT
A managed private APN assigns every device to an isolated carrier slice, producing a single ingress to the enterprise network, with traffic bypassing shared internet paths and reducing exposure.
Read more...Extra slim 2,4 GHz radio module
Telecoms, Datacoms, Wireless, IoT
The Thyone I radio module from Würth Elektronik now has a little sibling: Thyone-e, which takes up 30% less space and represents a cost-effective alternative for applications in which the long-range mode is not required.
Read more...Wi-Fi 6 plus Bluetooth LE SoC Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Silicon Labs’ SiWx917M SoC is the company’s lowest power Wi-Fi 6 SoC, ideal for ultra-low power IoT wireless devices using Wi-Fi, Bluetooth, Matter, and IP networking for secure cloud connectivity.
Read more...Two Bluetooth protocols – one module
Telecoms, Datacoms, Wireless, IoT
Würth Elektronik has introduced its Skoll-I, a compact wireless module that combines both Bluetooth Classic and Bluetooth Low Energy version 5.4 into a single solution.
Read more...Compact high-performance antennas Electrocomp
Telecoms, Datacoms, Wireless, IoT
KYOCERA AVX offers a variety of extremely compact and high-performance internal, on-board, multiprotocol 2,4 GHz antennas ideal for use in SiP applications.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version