Toyota plant turns to solar power
28 May 2008
Power Electronics / Power Management
Companies with large industrial plants will benefit from finding alternative energy resources in the face of Eskom's major power shortage. The electricity service provider has requested a reduction in power usage of 10% over all business sectors in order to reduce demand by 3000 Megawatts. Toyota's manufacturing plant in Durban is one of the first to install solar panels.
South Africa's growing economy has put huge strain on electricity usage. South Africa's electricity demand has been increasing at 15% a year, placing considerable strain on existing infrastructure. "We would like to work together with Eskom's new task team to aid in load reduction. This will ensure that our economy does not suffer loss from unnecessary load shedding," says Ferdi de Vos, Toyota spokesperson.
Renewable energy is a reliable alternative to the traditional kind. In 2006, over 18% of global final energy came from renewable sources. By the end of 2008, Toyota will have installed 270 solar panels into its Durban plant. The company's decision to install solar panels will enable it to operate at full capacity while also reducing demand on Eskom.
Where previously Toyota's Prospecton plant in Durban used electricity and gas to heat water, it will now use energy converted from the sun as a source of heat. Solar panels collect and convert energy from the sun into energy and heat that is then used by nearby buildings.
Toyota's renewable energy project began in 2006 with the installation of 44 x 2,5 m² panels and the second phase was completed in June 2007 when 150 panels were installed. In the third phase of this project, Toyota will install a further 120 panels. While the project has cost Toyota R3,5 million, the company expects to save R95 000 per month on energy costs when the project is completed in the next few months.
The car manufacturer will also reduce carbon dioxide released to the atmosphere by approximately 1350 tons per annum. Environmental impact of electricity use in South Africa is a concern which big electricity users like Toyota need to help address.
Further reading:
4 kW e-mobility DC-DC converter
Brabek
Power Electronics / Power Management
The RECOM RMOD4000 series of compact, plug-and-play DC-DC converters is a cost-effective solution to provide isolated 14 V, 28 V, or 56 V DC network rails from a high input voltage between 180 and 950 V DC.
Read more...
Aluminium case upgrade boosts performance
Vepac Electronics
Power Electronics / Power Management
The SQBF Quarter Brick 300 W DC to DC Converter is now available in a newly upgraded metal case designed to deliver improved durability and superior electrical performance across demanding applications.
Read more...
Extending the range of power converters
RS South Africa
Power Electronics / Power Management
Power Integrations recently announced a breakthrough in flyback topology extending the power range of flyback converters to 440 W - well beyond the limits that traditionally required more complex resonant and LLC topologies.
Read more...
Power-dense modules operate up to 115 V DC
Brabek
Power Electronics / Power Management
The RPMVH-0.5 series of cost-effective, non-isolated buck regulator modules from RECOM delivers 0,5A of output at fully regulated voltages up to 24 V DC.
Read more...
Finding value for money with your IoT battery
Uniross Batteries
Power Electronics / Power Management
Designing an IoT application involves a lot of choices. Designers are looking for performance and quality, but need to balance those alongside a low Total Cost of Ownership.
Read more...
Powering the IoT
Uniross Batteries
Power Electronics / Power Management
Choosing the right battery is not simply a technical detail, but a defining factor in the longevity and cost-effectiveness of any IoT deployment.
Read more...
The move to DC infrastructure
IOT Electronics
Power Electronics / Power Management
The shift toward direct current infrastructure in data centres is accelerating as operators pursue higher efficiency, improved reliability, and stronger alignment with renewable energy goals.
Read more...
Power inductor for automotive applications
Würth Elektronik eiSos
Power Electronics / Power Management
The WE-MXGA inductor features RDC values up to 25% lower and a saturation current up to 47% higher compared to other components currently available on the market.
Read more...
High-performance DC-DC converter
Conical Technologies
Power Electronics / Power Management
With a wide 9 - 40 V DC input range, the Claf Power DWHB400-F24xxN series is a high-performance DC-DC converter family ideally suited for 12 V and 24 V battery-based systems including vehicles, off-grid installations, and distributed power architectures.
Read more...
DC-DC converters for next-generation IoT
iCorp Technologies
Power Electronics / Power Management
AIPUPOWER’s K78XXJT-500R3 and K78XXJT-500R3-LB give designers a compact, high-efficiency power option for battery-powered and space-constrained systems, combining up to 96% efficiency with no-load input current as low as 0,2 mA.
Read more...
printer friendly version