Fluke has released the tough 27 II and 28 II digital multimeters (DMMs), designed to survive water, dust and rough handling. Both meters are IP67 rated for water and dust resistance and offer an extended operating temperature range of -15°C to +55°C; they will function in -40°C temperatures for up to 20 minutes. They operate in 95% humidity, and are designed and tested to withstand a 3 metre drop. When enclosed in their protective yellow holsters, both meters will float in fresh or salt water. Holsters are reversible to provide added protection for the display and controls when the meter is not in use.
Both meters measure up to 1000 V a.c. and d.c. and up to 10 A (20 A for 30 seconds). They feature a 10 000 μF capacitance range and measure frequencies up to 200 kHz. Min/max and average readings are provided to capture variations automatically, and auto and manual ranging are standard for maximum flexibility. The DMMs are powered by three AA batteries and provide an average battery life of 800 hours. They can withstand hazardous 8000 V spikes caused by load switching and faults on industrial circuits and comply with second edition IEC and ANSI electrical safety standards. They are safety rated for use in CAT IV 600 V/CAT III 1000 V working environments.
The Fluke 28 II provides additional functionality: it is a true-rms meter that features a high-resolution 20 000-count display mode and includes a built-in thermometer that enables users to take temperature readings without carrying a separate instrument. It captures peak min/max and features a high-pass filter to ensure accurate voltage and frequency measurements on adjustable speed drives and other electrically noisy equipment.
Plug-in timing module Comtest
Computer/Embedded Technology
Microchip’s MD-990-0011-B timing module redefines the role of timing, making it possible for customers to seamlessly integrate advanced synchronisation at any stage of development.
Read more...Rapid IoT prototyping simplified Future Electronics
Test & Measurement
The STEVAL-MKBOXPRO from STMicroelectronics is a compact, ready-to-use wireless development kit designed to accelerate the creation of intelligent IoT and wearable applications.
Read more...High speed precision digital multimeters Vepac Electronics
Test & Measurement
Siglent Technologies has expanded its precision measurement portfolio with the SDM4000A Series digital multimeters, delivering a powerful combination of speed, accuracy, and usability for modern automated test environments.
Read more...Non-contact linear position sensor Electrocomp
Test & Measurement
The Vishay 40 LHE Linear Position Sensor, designed for industrial motion control and automation, delivers robust, non-contact measurement performance using Hall effect technology.
Read more...Real-time monitoring for smart power distribution CST Electronics
Test & Measurement
By leveraging high-precision measurement, high-speed wave-recording, and AI-enabled analytics, the InHand Wireless Overhead-lines System empowers power utilities to accurately identify line faults and perform comprehensive load analysis.
Read more...Compact vector network analyser Vepac Electronics
Test & Measurement
Siglent Technologies has introduced the SNA5000X-E Vector Network Analyzer, a compact, cost-effective solution engineered to meet essential RF testing needs, while maintaining dependable performance.
Read more...Smart digital fibre sensor Avnet Abacus
Test & Measurement
Panasonic Industry Europe has introduced the new FX-250 digital fibre sensor designed to support users in their daily working routines as effectively as possible.
Read more...Compact USB spectrum analyser solution Vepac Electronics
Test & Measurement
The HAROGIC SAN Series USB Spectrum Analyser is a compact USB-based spectrum analyser and receiver that covers a broad frequency range from 9 kHz up to 9 GHz.
Read more...B&K Precision’s Series 1820B frequency counter Comtest
Test & Measurement
These compact and versatile instruments are designed for a wide range of frequency measurement applications, from telecommunications to verification and validation of oscillators.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version