The new AVR RZ Raven from Atmel is an evaluation kit that provides designers with a ready-to-use development platform in the rapidly growing low power wireless market for the 2,4 GHz ISM frequency band available worldwide.
The kit utilises AVR picoPower technology in combination with the RF performance offered by the AT86RF230 2,4 GHz ISM transceiver. The kit comprises two Raven boards, one USB Stick and a selection of firmware application and software aimed at reducing time to market for designers considering short range wireless ISM band applications based on IEEE802.15.4, ZigBee or 6LoWPAN.
The board can be used as a multi-application wireless node with an LCD graphical user interface. It has two AVR picoPower microcontrollers: an ATmega1284P that can be used to control RF application stacks, and an ATmega3290P that controls the display and user interfaces. The Raven contains a custom LCD display, a 5-position joystick, a microphone and a speaker allowing the evaluation of a variety of user interactions that are appropriate in the target wireless applications.
To support application development, the following functionalities are available: graphical user interface, communication ports, ATmega1284P port pins available on headers, on-board temperature sensor, voltage sensor, relay driver, boot loader and ISP support for programming.
The USB stick can serve as a PC gateway to the wireless network, or as the hardware platform for a wireless protocol analyser. It is based on the AT90USB1287 AVR microcontroller and the AT86RF230 transceiver.
The firmware provided includes low level drivers and application stacks enabling simple point to point communication, IEEE 802.15.4 compliant solutions, and more complex applications based on ZigBee and 6LoWPAN. Updated source code, libraries and documentation for the applications are available from the Atmel website. PC software is also provided, including a demo and a management suite for setup, configuration and management of wireless networks. Key features include a wireless protocol analyser and over-the-air upgrade (OTA).
EMC limits and levels Altron Arrow
Editor's Choice Circuit & System Protection
As soon as electronics and electrical systems started interfering with each other, the world had to come to some consensus. Considering physics is universal and does not care about what country electrical/electronic products are used in, it should be the same everywhere, right? It is nearly there, but not quite.
Read more...Introducing STM32CubeMX2 Altron Arrow
Design Automation
STMicroelectronics has launched STM32CubeMX2, a new evolution of its popular configuration and code generation tool for STM32 microcontrollers.
Read more...Sigfox SA powers smart connectivity
Editor's Choice Telecoms, Datacoms, Wireless, IoT
Sigfox South Africa is carving out a unique role, delivering low-power, wide-area network connectivity designed specifically for Internet of Things applications.
Read more...Modern LTE connectivity for IoT Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
Designed to meet the evolving requirements of industrial and commercial applications, the SIMCom A7681E LTE Cat-1bis module combines simplified hardware architecture with long lifecycle support in a compact package.
Read more...Seeing through the noise RF Design
Editor's Choice Telecoms, Datacoms, Wireless, IoT
How Adaptive Long Coherent Integration (ALCI) delivers superior measurement and positioning performance where conventional receivers fall short.
Read more...Optical Ethernet connectivity for rugged environments Hiconnex
Telecoms, Datacoms, Wireless, IoT
The rugged Stratos T2 Series media converter maintains high data throughput and durability in mission-critical applications in security, tactical, and military communications.
Read more...Next-gen SPE Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Next-generation 100/1000BASE-T1 Single Pair Ethernet PHYs integrate MACsec security, time sensitive networking, and functional safety.
Read more...LTE migration for legacy devices iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Quectel’s EG800Q-GL offers a low-cost upgrade path from 2G communication for legacy M2M devices and payment terminals.
Read more...Contactless IO-Link without wear IOT Electronics
Telecoms, Datacoms, Wireless, IoT
Phoenix Contact’s IO-Link couplers transmit up to 18 W of power and IO-Link data at speeds of up to 230,4 kbps across an air gap.
Read more...High-power RF amplifier design best practices RFiber Solutions
Telecoms, Datacoms, Wireless, IoT
By focusing on practical design considerations and planning for real-world conditions, engineers can build amplifiers that perform consistently and remain reliable over time.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version